Hammer Crusher/ stone crusher

Hammer Crusher is suitable for both dry and wet crushing of brittle, medium hard material for the cement,coal,metallurgic

Hammer Crusher Application:

Hammer Breaker is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.

 

Hammer Crusher Operating Principle:

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Technical Data of Hammer Crusher:

Model	Max feeding size (mm)	Capacity (t/h)	Motor Power(kw)	Weight (t)
PC400*300	30	5-8	11	1.5
PC600*400	100	10-15	18.5	3
PC800*600	150	20-25	55	7
PC800*1000	280	20-50	110	12
PCH0606	200	18-30	30	17
PCH0808	250	30-50	45	29
PCH1010	300	45-80	90	52

Hammer Crusher/ stone crusher